5 Blacktop Resurfacing Options for Schools

blacktop resurfacing options for schools

Need your school’s blacktop repaired? Whether elementary school, middle school, high school, or college, keep these blacktop resurfacing options in mind.

Is your school’s blacktop looking a bit…worn down? If you’re a school administrator or property owner looking for the right paving solution to fix your school’s blacktop, look no further.

Blacktop resurfacing options are more varied than you might think. Having a thorough understanding of your options and their different characteristics will help you make sure you choose the very best of paving options for your school.

Here’s a simple guide to 5 blacktop resurfacing options for your school.

1. Crack Sealing

A school blacktop is where children and students spend a good portion of their time each day. It’s the place where they can let loose, play, and learn new things outside of the classroom. 

But, if your blacktop is starting to crack, this could pose a safety hazard to students and even lead to far more expensive or dangerous problems in the future.

Crack sealing is available to schools whose blacktops are in need of more minor resurfacing-type repairs. It’s a way for pavers to fill in potentially harmful cracks that are often caused by flooding or water damage.

2. Asphalt Resurfacing

Let’s say your blacktop is anywhere from 25 to 30 years old or more. If this is the case, then it’s likely time to do a total resurfacing. Good asphalt blacktops will usually stay in decent condition for upwards of 20 years. 

However, if it’s been a few decades or your blacktop is beyond the crack sealing state, a total asphalt resurfacing is probably needed. 

Fortunately, with a good reputable paver, resurfacing is a fast and cost-efficient way to fix your blacktop. It often entails having layers stripped off to check for existing damage, surface changes, or problems.

Resurfacing costs a fraction of the cost of a new paving job. Plus, it makes your blacktop look smooth and nice.

3. Asphalt Paving

If damage to your blacktop or the underlying surface is deeply severe, then you may find that resurfacing isn’t even enough.

In this case, asphalt paving will need to take place. You will have all layers of the existing blacktop removed and stripped. Then, completely new asphalt will need to be laid.

4. Chip Sealing

Chip sealing is another great alternative for blacktops needing resurfacing or repairs. Chip sealing is the use of small, tar chips and hot liquid asphalt cement to create a surface that’s easy to grip.

Chip sealing can be applied to an existing pavement to help protect it from weathering and aging. Chip sealing is also a cooler alternative to other types of pavement–something students might appreciate on a hot spring day in Texas.

5. Hot Mix Asphalt

Hot mix asphalt is low maintenance, just like asphalt paving. It’s another potential option for your school’s blacktop. Laying this asphalt can usually be done in around 2 days so your turnaround time is quick and the kids can get back to recess.

You can also often have hot mix asphalt, resurfacing, or paving done for your school’s driveways and parking lots in a 2-day window if needed.

More on Blacktop Resurfacing Options

If you’re thinking it’s time to check out your blacktop resurfacing options, contact us today at (806) 407-7297 for an inspection and free quote.

We provide paving solutions in Midland, Lubbock, Odessa, Pecos, Monahans, Eastern New Mexico, and nearby towns/cities.

The experienced pavers at Daley’s Superior Asphalt Manufacturing can help you decide which option is the best fit for your school.

Asphalt vs. Blacktop: What’s the Difference?

When it comes to asphalt vs. blacktop, what’s the difference? If you’re feeling unclear, read here to learn more about these two common surface mixtures.

Is there even a difference?

You’ve driven on both asphalt and blacktop, probably not knowing one from the other. As long as the road is smooth and gets you to work on time, you don’t think twice.

If you are curious about the two, then it’s helpful to know there is, in fact, a difference. It can be tricky to tell, but there are key contrasts to note.

Keep reading below to discover more about asphalt vs. blacktop surfaces.

Are the Ingredients Different?

The ingredients are exactly the same. This statement probably leaves you more confused about how the two are different. 

When it comes to asphalt vs. blacktop, the ingredients are the same but the way they are measured out and brought together are different.

The two main ingredients in both are crushed stone and bitumen. Bitumen is a viscous fluid and very thick. It’s used heavily in the construction industry.

In asphalt, the crushed stone is held together by the bitumen. It’s plenty strong enough for all cars and vehicles that drive over it, but it is malleable. 

When it comes to blacktop, there’s a higher ratio of crushed stone. It also has to be mixed at a higher temperature than asphalt. Blacktop isn’t as durable as asphalt.

What Are the Uses?

Since asphalt is more flexible than blacktop, it can be used for intricate paving projects like winding driveways. It’s also fairly water-resistant so it can be used to line pools. You’ll also see it used for airport runways.

Because blacktop isn’t as durable as asphalt, you’ll see blacktop used in more residential areas. There are plenty of pathways, playgrounds, and simple driveways that use blacktop. You can pick it apart from asphalt because it appears shinier in the sun.

Which One is Better?

Deciding which material is better is a situational decision. It depends on what project you’re doing and where you’re doing it.

For areas with less traffic, it can be better to use blacktop. If there’s going to be a lot of heavyweight vehicles going back and forth, go with asphalt. You can also use asphalt to seal cracks in driveways. 

Asphalt is also much smoother due to the lower amount of crushed rock and creates less wear on tires. Take this into consideration if you’re trying to choose between the two for a project. 

Know the Difference: Asphalt vs. Blacktop

When you’re late for class, you don’t really care what you’re driving on as long as it gets you there safely and quickly. It’s all the same. However, if you do start looking at asphalt vs. blacktop, you’ll start to notice differences.

Both are made with the same materials, but they are put together differently. When deciding which one to use, construction or paving specialists have to look at the environment and daily situations. Generally, asphalt has proven to be better in high traffic areas while blacktop is great for quiet, residential areas.

Looking to get quality paving work done? Contact us at 806-407-7297 to schedule an inspection and get a free quote.

Daley’s Superior Asphalt Manufacturing, Inc. provides trusted Lubbock paving solutions, as well as paving in Midland, Odessa, nearby West Texas areas, and the Eastern New Mexico region.